Tips & Tricks - Ensuring A Flawless New Shower Unit Installation

Contact Us Today

Are you interested in info on How to Build a Shower Enclosure for Your DIY Bathroom?

A successful shower setup calls for careful preparation and also a lot of work. For the most part, you will certainly require to do three types of tasks: mounting wall surfaces, mounting the plumbing, and finishing walls.

Various Kinds Of Shower Units

Push-on Mixer: The tube as well as spray parts of the push-on mixer shower device can be attached to the bathroom tap according to your demand, and also the water temperature can be adjusted by means of the faucets. Push-on mixers are cheap and incredibly basic to mount. However, although the hose connection is basic, it is conveniently dislodged. Additionally, it is troublesome to change the temperature level.

Bath/Shower Mixer: The tube and spray of this type of shower are integrated with a bathroom mixer tap, as well as the temperature level can be changed through the bath taps. It is an extremely affordable alternative and no extra plumbing is involved. Nonetheless, the bath/shower mixers additionally deal with bothersome temperature level control alternatives.

Handbook Mixer: The pipe as well as spray of a hands-on mixer shower unit are a part of the wall device and also the cold and hot water materials are attached to a solitary shutoff The temperature level and also stress of the water are managed with either one or a variety of knobs (in extra pricey showers). Although temperature level control is much easier in manual mixer kinds, they are extra costly than the previously mentioned mixers. They also call for extra plumbing of hot and cold water supply pipelines.

Thermostatic Mixer: The hose and also spray of this shower kind are a part of the wall device as well as the hot and cold water supplies are attached to a solitary valve below as well. It is total with a built-in stabiliser to self-adjust the water temperature level as well as to prevent it from becoming also hot. One of the greatest advantages of a thermostatic mixer shower kind consists of convenient temperature level control. Nevertheless, it is the most pricey of the various mixer options.

Power Shower: A power shower is a single unit including an effective electrical pump that can altering both the water pressure as well as temperature level. This sort of shower can be fitted if there is supply of water from a cold water cistern as well as a warm water cyndrical tube. A power shower makes the adjustment of both pressure as well as temperature level very easy. On the other hand, it disagrees for water heated directly by the shower or where the water is supplied by a combination central heating boiler under keys pressure.

Electric Shower: An electric shower is plumbed right into a mains cold water supply and also it heats the water electrically. It is necessary to note that for this shower kind to be mounted, the mains stress requires to be at least 0.7 kg/sq centimeters (10lb/sq in). The device allows the temperature level and also pressure to be changed using a knob. Designs with temperature level stabilisers are much better as they remain untouched by various other taps elsewhere in use within the home. A significant drawback of electrical showers is that the control knob only permits the option of high temperatures at much less pressure, or reduced temperature levels at a greater pressure. This is troublesome in the winter season when the spray is commonly weak and the keys water is colder. Nevertheless, this trouble is dealt with in some versions which are offered with a winter/summer setup.

Most Typical Errors

Violating or overlooking local code constraints.

Utilizing pipelines that are as well tiny.

Connecting copper to galvanized without making use of a brass or dielectric fitting in between the two.

Not making use of tape or pipe substance at threaded joints.

Not leveling your components when mounting them.

Not setting up an air void filling up for components.

Cutting supply stub outs as well short to mount the shutoff valves onto after the completed wall surface is in area.

Not appropriately aligning tubes into installations or stop shutoffs. (Forcing the nut onto the compression ring at an angle when the tubes is at an angle will certainly cause a leakage.).

When turning the water back on in your house, always run the outdoors hose shutoff or flush your commodes to bleed dust and air from the lines. This particles can create problems in your sink taps as well as other plumbing trim.

Prep work.

To start with, you should pick the kind of shower that you desire to install. It is very important to ascertain whether the selected shower can dealing with particular systems and also can regulate a risk-free degree of water through the central heating boiler. Most shower systems nowadays are made to be flexible to various water stress (such as saved hot water as well as cool keys).
It is additionally important to take into consideration the water pressure and the preparation of the piping and also drainage for the shower.

Technique.

Relying on the type of shower you wish to set up, the shower head have to either be suited order to prevent its contact with the water in the bath listed below or the base tray, or it has to have a check valve.
Prior to beginning, it is recommended to note the positions of the shower head as well as control, as well as to intend the pipe-work involved. Furthermore, the water drainage system to remove the waste water will certainly require to be intended. Both positions of the cable path as well as the shower button will certainly additionally need to be considered if an instant or electrical shower device is being mounted.
Make use of the instruction guide offered with the shower device to fit the shower control.Before suitable the pipes that will supply the water to the shower system, it is important to cut off the supply of water. In order to secure the pipes, they should be given a waterproof covering and likewise fitted with isolating valves. The pipes can then be buried into the wall and plastered over to neaten the overall look.
Fit the base tray, shower head, and fittings.
Connect the main shower control to the pipes that will certainly be supplying the water (This may need a female screw thread adapter).
Reconnect the water supply and test the pipes for any leaks, as some may need firm.
If you are mounting an electric shower, bear in mind to switch off the electricity supply before making any electrical connections. Once these connections have been made (there should be guidance within the instruction manual), the power supply can be switched back on.

Adjusting Water Stress to Fit Your Shower.

The cold water tank can be lifted to a greater height (sometimes as little as 150mm (6inches)) by installation a strong wooden support beneath it - possibly made up of struts and also blockboards. If you pick this choice, the primary as well as distribution pipes will certainly likewise have to be raised to meet the brand-new elevation of the tank.
Additionally, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is selected, it must be linked into the power supply in order to operate.

Piping and also Water drainage.

It is best to use 15mm size supply pipelines, as well as make the runs to the shower as brief and also straight as possible so as to maintain optimal pressure and reduce warmth loss. Additionally, by reducing using elbows for pipeline corners, you can lower the resistance in the circulation of the water system. You can achieve this by flexing the pipes rather.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

I was shown that editorial on How to Install a Direct-to-Stud Shower Enclosure through an associate on our other blog. Do you know about somebody who is intrigued by the niche? Feel free to share it. Thank you so much for your time invested reading it.

Get Quote